10/22 Ruger .920 Bull Barrel to 1/2-28RH Slip On Adapter

Product Detail:

Add 1/2-28 Right Hand threads to your Ruger .920 bull barrel with this premium grade thread adapter. Made out of quality black oxidized steel, simply slip this adapter over the end of your barrel, tighten the brass set screws, and that's it! Now you can mount standard 1/2-28 RH accessories on the end of your unthreaded 920 bull barrel! 

  

Inner Diameter: .927 inches

Outer Threads: 1/2"-28 RH

Material: Stainless Steel

Set Screws: 1/4"-20 Brass (Allen Type)


So you like a clean gun barrel but hate the mess and smell of conventional cleaning products? Well we couldn't agree more. Introducing Solvent Trap Adapters. These adapters secure an oil filter onto the end of your barrel so the used cleaning solvent is trapped into the filter versus... everywhere it shouldn't be. Solvent Trap Adapters: saving your nose and carpet from all sorts of nasty.

Registration with the ATF or other agencies is NOT a requirement for any Infinite Product Solution adapters, provided that they are used for their intended purposes. The ATF does not regulate muzzle adapter devices provided there is no reduction in db's to the report of the firearm.

It is a violation of Federal law to muffle the report of a firearm with any non ATF/NFA registered device. However, it is Federally lawful for an individual to, for individual use, make such a device, provided that they first apply for a permit and register the device with the ATF (Form 1) before making such a device. If it is your intent to create such an item, it is your responsibility to review ATF regulations and seek their guidance, along with that of your State and Local Authorities, so as to remain lawful in your endeavor. 

We are not responsible for any unlawful or unintended use of our products. Thank you!